Zhuzhou Jiabang Refractory Metal Co., Ltd
Zhuzhou Jiabang Refractory Metal Co., Ltd
Add to Cart
Niobium Products Customized Size ASTM B394 Bright Surface Purity Niobium Tube
Specification
Niobium and Niobium tube
1.Material: RO4200-1, RO4210-2
2.The Size of niobium tube: OD1.0-150mm*TK 0.2-5.0mm*L
3.Length:200mm-9000mm
4.Standard: As per ASTM B394-98
5.Purity: >=99.9% or 99.95% with best Niobium price
6. Table 1. Grade of Niobium tube
| Grade | Suplying state | Diameter | Lengtha | Voluntary Standers |
| Nb1 Nb2 Nb3 Nb4 | Cold state(Y) Annealedb(M) | 3.0-6.5 >6.5-10.0 >10-18 | >500 | ASTM B392-03 |
| Thermal processing state(R) Annealedb(M) | >18-25 >25-40 >40-50 >50-65 | |||
| FNb1 FNb2 | Thermal processing state(R) Annealedb(M) | 3.5-5.0 >5.0-12 | >500 >300
| |
| NbHf10-1 | Thermal processing state(R) Annealedb(M) | 20-80 | 500-2000 | |
| Note : the length of Annealing niobium tube being supplied is not greater than 2500mm.
| ||||
7. Table 2. Niobium tube Chemical PPM
| chemistry% | ||||||||||||
| designation | chief component | impurities maximum | ||||||||||
| Nb | Fe | Si | Ni | W | Mo | Ti | Ta | O | C | H | N | |
| Nb1 | Remainder | 0.004 | 0.003 | 0.002 | 0.004 | 0.004 | 0.002 | 0.07 | 0.01 | 0.004 | 0.0012 | 0.002 |
| Nb2 | Remainder | 0.005 | 0.005 | 0.005 | 0.01 | 0.01 | 0.004 | 0.1 | 0.015 | 0.01 | 0.0015 | 0.01 |
8.Table 3. Mechanical requirements of Niobium tube (annealed condition)
| Grade | Tensile strengthδbpsi (MPa),≥ | Yield strength δ0.2, psi (MPa),≥ | Elongation in 1"/2" gage length,%,≥ |
| RO4200-1 RO4210-2 | 18000 (125) | 10500 (73) | 25
|
| Special requirements of niobium pipe to be agreed on by the supplier and buyer of negotiations | |||
